Added a new user on Ubuntu, set password not working?2019 Community Moderator ElectionHow to apply changes of newly added user groups without needing to reboot?New user can't login in Linux MintForce pubkey-auth user to set password at first loginHow do I set a newly created user account to NOT prompt the user to change their password?User created without a password behaves as if he had onesudo not working on debianChange default group for any new userCreating a user without a password on NetBSDusermod to change user password is not workingArchLinux | Login password does not work after creating new user account
Could the E-bike drivetrain wear down till needing replacement after 400 km?
My friend sent me a screenshot of a transaction hash, but when I search for it I find divergent data. What happened?
Query about absorption line spectra
Divine apple island
Does having a TSA Pre-Check member in your flight reservation increase the chances that everyone gets Pre-Check?
How can Trident be so inexpensive? Will it orbit Triton or just do a (slow) flyby?
Could solar power be utilized and substitute coal in the 19th Century
How do I repair my stair bannister?
How to express sadness?
Create all possible words using a set or letters
Should I install hardwood flooring or cabinets first?
Is it possible to have a strip of cold climate in the middle of a planet?
Is a model fitted to data or is data fitted to a model?
Remove Expired Scratch Orgs From VSCode
What does this horizontal bar at the first measure mean?
Can the Supreme Court overturn an impeachment?
Drawing ramified coverings with tikz
Do Legal Documents Require Signing In Standard Pen Colors?
Find last 3 digits of this monster number
How can "mimic phobia" be cured or prevented?
Is it improper etiquette to ask your opponent what his/her rating is before the game?
Folder comparison
Journal losing indexing services
THT: What is a squared annular “ring”?
Added a new user on Ubuntu, set password not working?
2019 Community Moderator ElectionHow to apply changes of newly added user groups without needing to reboot?New user can't login in Linux MintForce pubkey-auth user to set password at first loginHow do I set a newly created user account to NOT prompt the user to change their password?User created without a password behaves as if he had onesudo not working on debianChange default group for any new userCreating a user without a password on NetBSDusermod to change user password is not workingArchLinux | Login password does not work after creating new user account
I created a new user:
$ sudo useradd -m Ari -p pass123
But when I went to login it said the password was incorrect, I know it's correct because I saved the command line log as a text file.
Other than that, at the same time I also created a group:
$ sudo groupadd testgroup1
and added the new account to it:
$ sudo usermod -a -G testgroup1 Ari
Why can't a log in?
users group
New contributor
add a comment |
I created a new user:
$ sudo useradd -m Ari -p pass123
But when I went to login it said the password was incorrect, I know it's correct because I saved the command line log as a text file.
Other than that, at the same time I also created a group:
$ sudo groupadd testgroup1
and added the new account to it:
$ sudo usermod -a -G testgroup1 Ari
Why can't a log in?
users group
New contributor
2
On Ubuntu, as in Debian, you're supposed to useadduser
andaddgroup
. That takes care of Stuff for you.
– Faheem Mitha
yesterday
add a comment |
I created a new user:
$ sudo useradd -m Ari -p pass123
But when I went to login it said the password was incorrect, I know it's correct because I saved the command line log as a text file.
Other than that, at the same time I also created a group:
$ sudo groupadd testgroup1
and added the new account to it:
$ sudo usermod -a -G testgroup1 Ari
Why can't a log in?
users group
New contributor
I created a new user:
$ sudo useradd -m Ari -p pass123
But when I went to login it said the password was incorrect, I know it's correct because I saved the command line log as a text file.
Other than that, at the same time I also created a group:
$ sudo groupadd testgroup1
and added the new account to it:
$ sudo usermod -a -G testgroup1 Ari
Why can't a log in?
users group
users group
New contributor
New contributor
New contributor
asked yesterday
Ari VictorAri Victor
1284
1284
New contributor
New contributor
2
On Ubuntu, as in Debian, you're supposed to useadduser
andaddgroup
. That takes care of Stuff for you.
– Faheem Mitha
yesterday
add a comment |
2
On Ubuntu, as in Debian, you're supposed to useadduser
andaddgroup
. That takes care of Stuff for you.
– Faheem Mitha
yesterday
2
2
On Ubuntu, as in Debian, you're supposed to use
adduser
and addgroup
. That takes care of Stuff for you.– Faheem Mitha
yesterday
On Ubuntu, as in Debian, you're supposed to use
adduser
and addgroup
. That takes care of Stuff for you.– Faheem Mitha
yesterday
add a comment |
1 Answer
1
active
oldest
votes
The -p
option is looking for an encrypted password:
-p, --password PASSWORD
The encrypted password, as returned by crypt(3). The default is to disable the
password.
Note: This option is not recommended because the password (or encrypted password) will
be visible by users listing the processes.
You should make sure the password respects the system's password policy.
You should use the following to change the password:
sudo passwd Ari
In order to use the -p
option you must first encrypt the password. You can use some of the methods mentioned here such as:
$ mkpasswd
Password:
1puqSPGTnyi5o
$ sudo useradd -m Ari -p 1puqSPGTnyi5o
Note the mkpasswd
utility is included in the whois
package which can be obtained through apt
What would be the correct way to do it from the terminal?$ sudo useradd -m Ari pass123
or just creating the user then doing as you suggest?
– Ari Victor
yesterday
1
The preferred and safe way is to set the password separately withpasswd
but I have updated the question to include instructions on encrypting a password for use withuseradd -p
– Jesse_b
yesterday
3
Don't useopenssl passwd
, and especially not with-crypt
. It uses the obsolete DES-based crypt function, which among other things is limited to only 8-characters passwords (and 2-character salts). The openssl on my system does support the MD5-based hash ($1$
), but not the newer SHA2-based hashes ($5$
and$6$
), which are the ones commonly used on Linux-systems.
– ilkkachu
yesterday
If you need to batch change passwords, usechpasswd
. By default it runs the change through PAM, so you get a) the same hashing as withpasswd
, and b) the passwords updated to whatever it is your system actually uses (in case you have e.g. LDAP). It also does support e.g.-c SHA512
, too, if you do need to bypass PAM.
– ilkkachu
yesterday
add a comment |
Your Answer
StackExchange.ready(function()
var channelOptions =
tags: "".split(" "),
id: "106"
;
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function()
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled)
StackExchange.using("snippets", function()
createEditor();
);
else
createEditor();
);
function createEditor()
StackExchange.prepareEditor(
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader:
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
,
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
);
);
Ari Victor is a new contributor. Be nice, and check out our Code of Conduct.
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f508170%2fadded-a-new-user-on-ubuntu-set-password-not-working%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
The -p
option is looking for an encrypted password:
-p, --password PASSWORD
The encrypted password, as returned by crypt(3). The default is to disable the
password.
Note: This option is not recommended because the password (or encrypted password) will
be visible by users listing the processes.
You should make sure the password respects the system's password policy.
You should use the following to change the password:
sudo passwd Ari
In order to use the -p
option you must first encrypt the password. You can use some of the methods mentioned here such as:
$ mkpasswd
Password:
1puqSPGTnyi5o
$ sudo useradd -m Ari -p 1puqSPGTnyi5o
Note the mkpasswd
utility is included in the whois
package which can be obtained through apt
What would be the correct way to do it from the terminal?$ sudo useradd -m Ari pass123
or just creating the user then doing as you suggest?
– Ari Victor
yesterday
1
The preferred and safe way is to set the password separately withpasswd
but I have updated the question to include instructions on encrypting a password for use withuseradd -p
– Jesse_b
yesterday
3
Don't useopenssl passwd
, and especially not with-crypt
. It uses the obsolete DES-based crypt function, which among other things is limited to only 8-characters passwords (and 2-character salts). The openssl on my system does support the MD5-based hash ($1$
), but not the newer SHA2-based hashes ($5$
and$6$
), which are the ones commonly used on Linux-systems.
– ilkkachu
yesterday
If you need to batch change passwords, usechpasswd
. By default it runs the change through PAM, so you get a) the same hashing as withpasswd
, and b) the passwords updated to whatever it is your system actually uses (in case you have e.g. LDAP). It also does support e.g.-c SHA512
, too, if you do need to bypass PAM.
– ilkkachu
yesterday
add a comment |
The -p
option is looking for an encrypted password:
-p, --password PASSWORD
The encrypted password, as returned by crypt(3). The default is to disable the
password.
Note: This option is not recommended because the password (or encrypted password) will
be visible by users listing the processes.
You should make sure the password respects the system's password policy.
You should use the following to change the password:
sudo passwd Ari
In order to use the -p
option you must first encrypt the password. You can use some of the methods mentioned here such as:
$ mkpasswd
Password:
1puqSPGTnyi5o
$ sudo useradd -m Ari -p 1puqSPGTnyi5o
Note the mkpasswd
utility is included in the whois
package which can be obtained through apt
What would be the correct way to do it from the terminal?$ sudo useradd -m Ari pass123
or just creating the user then doing as you suggest?
– Ari Victor
yesterday
1
The preferred and safe way is to set the password separately withpasswd
but I have updated the question to include instructions on encrypting a password for use withuseradd -p
– Jesse_b
yesterday
3
Don't useopenssl passwd
, and especially not with-crypt
. It uses the obsolete DES-based crypt function, which among other things is limited to only 8-characters passwords (and 2-character salts). The openssl on my system does support the MD5-based hash ($1$
), but not the newer SHA2-based hashes ($5$
and$6$
), which are the ones commonly used on Linux-systems.
– ilkkachu
yesterday
If you need to batch change passwords, usechpasswd
. By default it runs the change through PAM, so you get a) the same hashing as withpasswd
, and b) the passwords updated to whatever it is your system actually uses (in case you have e.g. LDAP). It also does support e.g.-c SHA512
, too, if you do need to bypass PAM.
– ilkkachu
yesterday
add a comment |
The -p
option is looking for an encrypted password:
-p, --password PASSWORD
The encrypted password, as returned by crypt(3). The default is to disable the
password.
Note: This option is not recommended because the password (or encrypted password) will
be visible by users listing the processes.
You should make sure the password respects the system's password policy.
You should use the following to change the password:
sudo passwd Ari
In order to use the -p
option you must first encrypt the password. You can use some of the methods mentioned here such as:
$ mkpasswd
Password:
1puqSPGTnyi5o
$ sudo useradd -m Ari -p 1puqSPGTnyi5o
Note the mkpasswd
utility is included in the whois
package which can be obtained through apt
The -p
option is looking for an encrypted password:
-p, --password PASSWORD
The encrypted password, as returned by crypt(3). The default is to disable the
password.
Note: This option is not recommended because the password (or encrypted password) will
be visible by users listing the processes.
You should make sure the password respects the system's password policy.
You should use the following to change the password:
sudo passwd Ari
In order to use the -p
option you must first encrypt the password. You can use some of the methods mentioned here such as:
$ mkpasswd
Password:
1puqSPGTnyi5o
$ sudo useradd -m Ari -p 1puqSPGTnyi5o
Note the mkpasswd
utility is included in the whois
package which can be obtained through apt
edited yesterday
answered yesterday
Jesse_bJesse_b
14k23572
14k23572
What would be the correct way to do it from the terminal?$ sudo useradd -m Ari pass123
or just creating the user then doing as you suggest?
– Ari Victor
yesterday
1
The preferred and safe way is to set the password separately withpasswd
but I have updated the question to include instructions on encrypting a password for use withuseradd -p
– Jesse_b
yesterday
3
Don't useopenssl passwd
, and especially not with-crypt
. It uses the obsolete DES-based crypt function, which among other things is limited to only 8-characters passwords (and 2-character salts). The openssl on my system does support the MD5-based hash ($1$
), but not the newer SHA2-based hashes ($5$
and$6$
), which are the ones commonly used on Linux-systems.
– ilkkachu
yesterday
If you need to batch change passwords, usechpasswd
. By default it runs the change through PAM, so you get a) the same hashing as withpasswd
, and b) the passwords updated to whatever it is your system actually uses (in case you have e.g. LDAP). It also does support e.g.-c SHA512
, too, if you do need to bypass PAM.
– ilkkachu
yesterday
add a comment |
What would be the correct way to do it from the terminal?$ sudo useradd -m Ari pass123
or just creating the user then doing as you suggest?
– Ari Victor
yesterday
1
The preferred and safe way is to set the password separately withpasswd
but I have updated the question to include instructions on encrypting a password for use withuseradd -p
– Jesse_b
yesterday
3
Don't useopenssl passwd
, and especially not with-crypt
. It uses the obsolete DES-based crypt function, which among other things is limited to only 8-characters passwords (and 2-character salts). The openssl on my system does support the MD5-based hash ($1$
), but not the newer SHA2-based hashes ($5$
and$6$
), which are the ones commonly used on Linux-systems.
– ilkkachu
yesterday
If you need to batch change passwords, usechpasswd
. By default it runs the change through PAM, so you get a) the same hashing as withpasswd
, and b) the passwords updated to whatever it is your system actually uses (in case you have e.g. LDAP). It also does support e.g.-c SHA512
, too, if you do need to bypass PAM.
– ilkkachu
yesterday
What would be the correct way to do it from the terminal?
$ sudo useradd -m Ari pass123
or just creating the user then doing as you suggest?– Ari Victor
yesterday
What would be the correct way to do it from the terminal?
$ sudo useradd -m Ari pass123
or just creating the user then doing as you suggest?– Ari Victor
yesterday
1
1
The preferred and safe way is to set the password separately with
passwd
but I have updated the question to include instructions on encrypting a password for use with useradd -p
– Jesse_b
yesterday
The preferred and safe way is to set the password separately with
passwd
but I have updated the question to include instructions on encrypting a password for use with useradd -p
– Jesse_b
yesterday
3
3
Don't use
openssl passwd
, and especially not with -crypt
. It uses the obsolete DES-based crypt function, which among other things is limited to only 8-characters passwords (and 2-character salts). The openssl on my system does support the MD5-based hash ($1$
), but not the newer SHA2-based hashes ($5$
and $6$
), which are the ones commonly used on Linux-systems.– ilkkachu
yesterday
Don't use
openssl passwd
, and especially not with -crypt
. It uses the obsolete DES-based crypt function, which among other things is limited to only 8-characters passwords (and 2-character salts). The openssl on my system does support the MD5-based hash ($1$
), but not the newer SHA2-based hashes ($5$
and $6$
), which are the ones commonly used on Linux-systems.– ilkkachu
yesterday
If you need to batch change passwords, use
chpasswd
. By default it runs the change through PAM, so you get a) the same hashing as with passwd
, and b) the passwords updated to whatever it is your system actually uses (in case you have e.g. LDAP). It also does support e.g. -c SHA512
, too, if you do need to bypass PAM.– ilkkachu
yesterday
If you need to batch change passwords, use
chpasswd
. By default it runs the change through PAM, so you get a) the same hashing as with passwd
, and b) the passwords updated to whatever it is your system actually uses (in case you have e.g. LDAP). It also does support e.g. -c SHA512
, too, if you do need to bypass PAM.– ilkkachu
yesterday
add a comment |
Ari Victor is a new contributor. Be nice, and check out our Code of Conduct.
Ari Victor is a new contributor. Be nice, and check out our Code of Conduct.
Ari Victor is a new contributor. Be nice, and check out our Code of Conduct.
Ari Victor is a new contributor. Be nice, and check out our Code of Conduct.
Thanks for contributing an answer to Unix & Linux Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f508170%2fadded-a-new-user-on-ubuntu-set-password-not-working%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
2
On Ubuntu, as in Debian, you're supposed to use
adduser
andaddgroup
. That takes care of Stuff for you.– Faheem Mitha
yesterday